Visitor No.6412446 ..   
TrustPassKenplas Industry Ltd.Plastics ProjectsPET Preform/Bottle Project
 

PET Bottle/Jar Stretch Blow Molding

PET Bottle Stretch Blow MoldingPET BottlesPET Bottle Processing:

Stretching blow molding is also called biaxial orientation blow molding. It is a kind of package container producing method stretching preform in axes by mechanical device and in radial by compressed air ( air should be cleaned by air purifier if necessary) when material is under high elasticity condition. This is widely used for PET, PE,  PVC and etc.

Orientation can improve product's mechanical property, solvent resistance, transparency and anti-permeability. Polymer molecule is unbalanced long-chain structure. Orientation happens when stretching. Orientation means molecule arrange along stretching direction parallelly.

Stretching blow molding brings biaxial orientation effect to the products. To cool products quickly means high orientation degree.

The glass transition temperature of PET is 820C, and its best orientation temperature is 1050C.

Solution for PET Bottle/Jar Blow Molding

Wholeview of PET Bottle Stretch Blow Molding PET Preforms Air Purifier PET Stretch Blow Molding Machine PET Blow Mold PET Bottles Air Compressor

PET Stretch Blow Molding

PET stretch blow molding machine is a kind of container making method that stretches PET preform in axes by mechanical device and in radial by compressed air when PET preform is under high elasticity condition.

Orientation can improve products' mechanical property, solvent resistance, transparency and antipermeability. Polymer molecule is long-chain structure which is unbalanced. Orientation happens when stretching. Orientation means molecule chains arrange along stretching direction parallel.

Stretching blow moulding brings biaxial orientation effect to the products. To cool products quickly means high orientation degree. So to reach satisfactory orientation effect, we can raise stretch speed, increase polymer's molecular weight or lower stretching temperature.

In orientation molecular chain can move freely along pulling force temperatures for four different materials.

Material Best Orientation Temperature (0C) Glass Transition Temperature (0C)
PET 105 82
PVC 90 70
PP 150 105
PAN 120 98

There are two methods to estimate orientation degree:

  • Gauge tensile strength of PET slice cut from bottles to estimate its orientation degree. In terms of theory tensile strength after orienting equals its tensile strength before orienting multiplied corresponding draw ratio approximately. If gauged value is 14MPa less than calculated value, it means orientation not enough.
  •  There is another quick and simple method. Cut the bottle and tear it in axes and radial by hand. It means orientation not enough when the bottle be torn smoothly. On the contrary it means good orientation when the bottle is not easy to be torn.

Thickness of carbonated drink bottles is required to be 0.45~ 0.55mm. But for stretched and blown bottles 0.25~0.38mm will be okay because orientation will improve products' quality.

Catalogue Download
 
Related Posts           Click Here to See More...
TopicsForum NamePost Time
PC bottles Blow Molding (Machine) 1/15/2009 12:48:34 AM
semi auto blow moulding machine Blow Molding (Machine) 11/27/2007 7:51:14 AM
Hot fill bottles - new design Blow Molding (Machine) 11/18/2007 2:25:13 PM
PET Raw mateials needed Blow Molding (Machine) 9/19/2007 4:09:07 PM
requiest for pc blow molding machine Blow Molding (Machine) 5/3/2006 8:04:07 PM
PET Bottles Blow Molding (Machine) 4/6/2006 9:35:17 AM
pet process Blow Molding (Machine) 1/29/2006 3:17:54 PM
quatation\catolog Blow Molding (Machine) 10/11/2005 4:07:34 PM
blow moling process Blow Molding (Machine) 9/10/2005 7:30:07 AM
Super-heat-set PET Blow Molding (Machine) 7/19/2005 12:44:29 AM
blow molding process of PETG Blow Molding (Machine) 6/29/2005 7:56:54 PM
New barriers & coatings Blow Molding (Machine) 6/26/2005 3:40:10 PM
Pet Preform Heating Versus Bottle Blowing Blow Molding (Machine) 6/22/2005 10:43:42 PM
 
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2018 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.