Visitor No. 1862812 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Injection Molding ==> compression moulding machine for caps required
[Previous Topic] [Next Topic]
1
Dear Sir,
We are interested in buying compression moulding machine with 24 or 36 cavity with slitting, folding and liner machines to produce 28mm PCO neck for water

Fine
Poor
7/26/2010 6:56:35 AM By jose area
Dear Sir,
We are interested in buying compression moulding machine with 24 or 36 cavity with slitting, folding and liner machines to produce 28mm PCO neck for water and CSD and also 30mm x 25mm Alaska three start neck.
We need the machine similar to Sacme for production of these caps in lagos, Nigeria.
Please quote us for full set of machines, half set of CSD moulds and spare full set of 30mm mould.
We need hydraulic moulding machine set.You can also contact me on jaypee6@hotmail.com and ahujajp@yahoo.com
thanks,
Jaypee Ahuja
Lagos, Nigeria.
www.polybagsgroup.net
www.polybagsnigeria.com

Fine
Poor
3
 3/10/2010 5:00:50 AM By Ahuja Jawahar
1
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.