Visitor No. 1859984 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Trouble Shooting --PET Bottle Stretch Blow Molding ==> Sticky PET bottles
[Previous Topic] [Next Topic]
1
I heard there is a special anti-blocking aditive which is mixed up with the resin. We had the same phenomen with sticky preforms.

Fine
8
 Poor
3/26/2009 7:43:31 PM By Daniel
PET Bottles coming from specific supplier are sticky, blocking the conveyors and getting damage. whereas we use the same bottles from different supplier, runs smoothly on same conveyor. what are the possible root causes for this phenomenon? Pls note, the machines, materials used by both suppliers are same, but the bottles behave different.

Fine
18
 Poor
4
 10/1/2008 4:18:55 PM By (Anonym)
1
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.