Visitor No. 1859984 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Trouble Shooting -- PET Preform Injection Molding ==> PET preform quality testing
[Previous Topic] [Next Topic]
1
pls send for me hww can i test the quality of preform for hot fill bottle & normal pet bottleand other infourmation about preform mold quality.

Fine
Poor
8/9/2010 5:23:41 PM By Hemen kalita
off-line quality control for preforms
monitoring&incoming checks for:
1-Neck, finish-and body dimensions
2-concentricity
3-wall thickness
4-weight
5-strees
6-furher physical characteristics.
mamdouh elhamalawy

Fine
5
 Poor
4/15/2010 8:14:15 PM By mamdouh elhamalawy
how to test pet preform quality. and also say us which component is necessary for test

Fine
5
 Poor
3/25/2010 7:06:14 PM By arjun
ya,pls send for me haw can i test the quality of preform for hot fill bottle.and other infourmation about preform quality.

pradip

Fine
Poor
2/20/2010 8:09:44 PM By pradip patel
PLEASE SEND ME

Fine
Poor
1/18/2010 4:35:55 PM By NABIL
pls send for me haw can i test the quality of preform for hot fill bottle

Fine
3
 Poor
11/25/2009 10:32:23 PM By parastoo ruodgr
do you know any qulified laboratory (international) to full test the qulity of PET preform? please let me know.

Fine
17
 Poor
2
 8/5/2008 8:56:31 PM By saeid
1
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.