decrease cycle time injection mold, Injection Molding

Visitor No. 1862812 from US.

Kenplas Forum ==> Injection Molding ==> decrease cycle time injection mold

[Previous Topic]

[Next Topic]

Dear Mr Thanh Mai

In order to Reduce Cycle Time in Injection Moulding , we need to have Optimum Part Design with fairly uniform wall thickness.
Plastics material-Commodity Plastics we need to use Chilled water to Extract Heat from the Mould Rapidly
Mould material-Be Cu material can Reduce the Moulding cycle considerably.
Pl check whether this is FEASIBLE.
Thanx
Plastics Consultant

Ramesh D Mane

8/3/2010 4:26:56 PM By RAMESH D MANE

i m working in alhafiz cryestoplast hayatabad peshawer pakistan last 5year.
dear sir my qustion is
please pointout of lubrication of spindle chan.
we are use krones S-10 machine.
thanks
regard
tanoli

1/20/2010 1:02:52 PM By yasir tanoli

send me details about your mold & injection molding machine.

12/27/2009 11:41:12 PM By WAQQAS

Dear sir,

we require Process details of Pet preform in detail. Make it urgent. We are totaly new.

Regds
Bharatesh

12/27/2009 9:12:24 PM By Bharatesh

increse flow gates

12/25/2009 5:30:13 PM By WAQQAS

how do decrease cycle time injection mold?

7/23/2008 11:18:14 AM By thanh mai


*Post A Reply*
Name:
Email:	Send new posts of this topic to my email box.
Message:	(Max. 2KB)
Message:
Attachment:	(Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project]	[Plastics Machinery]	[Plastics Mold]	[Discussion Forum]	[Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd. Powered by Alentus.