Visitor No. 1859984 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Blow Molding ==> HOT Fill bottles (PET)
[Previous Topic] [Next Topic]
1
Dear sir ,
Could you please cleared me what properties of PET resin make bottle hazy.cooh ,additives metails or others.
regd

Fine
4
 Poor
2
 3/3/2010 6:21:30 PM By jmsrana
I made hot fill bottle with standart pet resin. But I not success about that condition. I desinged like hot fill bottle but I thing material is different.

Fine
6
 Poor
4
 12/21/2009 7:56:44 PM By umityasaraydin
What's the different betwen the single stage and two stage machine from the quality,quantities,maintenance ,price of the machine or the spare parts ,the life of the machine and more things.
what the type of pet products is suitable to produce on single stage machines and two stage from every things as quality ,....
Regards
aiman abu

Fine
9
 Poor
4
 5/9/2009 3:11:40 PM By aiman
WHAT TYPE OF “PET” IS SUITABLE FOR TO BE USED IN HOT FILL?

Fine
52
 Poor
12
 1/13/2008 3:20:41 PM By Karim
WHAT TYPE OF “PET” IS SUITABLE FOR TO BE USED IN DAIRY INDUSTRY?

Fine
16
 Poor
4
 1/13/2008 3:17:25 PM By (Anonym)
To prevent the deformation of the neck dimension while pouring hot content(having temp. above Tg) which (neck area) is the least crystaline area needs to be crystalised which causes opaque neck.

Fine
16
 Poor
2
 10/15/2007 1:12:43 PM By Chandranath Dutta
Can anybody give explantion why many PET BOttles used for hot fill products have a opaque crystallized neck while the bottles are transparent????

Fine
45
 Poor
8
 10/15/2007 12:19:11 AM By venkatesh S
1
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.