| 1 2 |
|
sir we wants pet-G resin so any avavibility send us mail
|
I have this for sale :
These PET-G rolls were made for a medical packaging application. The goods are PACUR and they are 6763 PET-G. I have lot numbers from PACUR, but I can’t certify it. The PET-G has been in my old customer’s warehouse for nearly 12 months, so while it is beautiful material and was (technically still is) FDA approved, I can’t certify it can be used for medical packaging anymore.
The PET-G is 50 mil thick. Heavy gauge stuff. Each roll is 16.75” wide, 535 feet long and weighs 240 lbs. There are 130 rolls, so we have 30,000 lbs of goods. They are on a 6” core and the roll is 22" in diameter. FOB Central USA.
|
Dear PET consumers
We have new grade for Heat Sealable applications , with vey good clarity , superior mechanical properties & excellent sealability . For any special application , this can be used .Please contact for any such requirement
S.T.Kulkarni
|
Dear Sir,
Please can you help us to get affordable prise of pet raisin and which country is producing best pet raisin.
We uses almost 200 M.Ton every month.
Pl.reply as soon as possible.
Regards,
Anand
|
whats the difference of PET, PET-G & PET-E ?
we are facing some problem in blister sealing,
presently we are using PETG for blister forming, and for sealing paper we are using the dupoint tyvek paper, it has water base polymeric coating for adhesive purpose,
till date we are not able find the solution for sealing problems,
we want to know what material will right for blister, and what type of sealing paper to be use for the blister sealing with what type of coating and will it work in heat sealing machine?
pleas let me know?
Paramesha
parampmd@gmail.com
|
|
Dear All; If you want better strength and longer cycle of rotations and 72 C hot washability with Polybrite, please use Futura JarPET-Super ! It provides excellent mechanical strength scratch resistance and no yeelowing like normal PET or PC..Please visit www.futurapolyesters.com or e mail to s.rangarajan@futurapolyesters.com
|
|
Will Pet or PET-G will be an option for 85 % ethyl alcohol+1% DEP+Perfume?
|
1. Mostly neck crystalized preforms are used for hot fill purpose, but 30/25 neck is too weak to meet this purpose. Based on this, your question seems quite strange.
2. For hot fill bottle blow molding, the blowing machine should be modified: twice blowing should be supported.
3. Blow mold should be heated to approx. 130c while working.
|
We are looking for 30g 3025 neck finish cryatalize neck preform for our new bottle productions. We have a few questions & hope you can help us:-
1. Can we run our automatic stretch blow machine by using crystalize
neck preform ?
2. Where can we buy such csrystalize neck preforms?. Can you recommend
a few suppliers to us ?
3. What type of temperature setting most suitable needed to be set in
our blow machine for such preforms.
I have read your Q&A site and they are very good & nteractive for people like us. Thank you.
|
|
Can PETg be extruded?
|
Dear sir
Hello ,
We are manufacture and exporter all kind of cams for textile machines :
For Carpet machines : Textima , Van De Wiele , CRM , ASR , ALD , ADR , CRT , CRX , GilBos and Etc .
For Fabric machines : Sulzer Cam , Torsion Rd , Cam Disk for let off ( Dobble & Single ) , Picanol , Vamatex , Air-Jet , Somet , Saurer Pin & Roller for all Cams esp . Saurer and Daftin .
Please let me know what kind of Cams do you use then we'll send you our best quality Cams and you can compare our Cams with original sample in quality ,guarantee and price , The same with original sample in quality and guarantee but in very low price .
We'll be so glad if we can receive your order as soon as possible .
Please feel free to contact me with the questions you may have, or if you need any further information .
Only we would like you answer to our e-mail even if you don’t need to our product .
I look forward to hearing from you soon.
Maharat Semnan Ind Co / Iran
Iran / Tehran P.O.Box : 16765-583
Head Office Telefax : 0098 – 21 – 77441400
maharatsemnan@yahoo.com
info@maharatco.com web : www.maharatco.com
Best Regards
Mr Zabihi
|
|
whats the difference of PET, PET-G & PET-E.
|
|
When using PETG in packaging, what resin code should be molded into the clam shell? Is it still a #1 with a PETG underneath? I've never seen this before an one of our factories wants to use PETG instead of PETE because they want to use the same heat sealing machine that they use with PVC packaging. Does this sound right to anyone?
|
|
Is there a additive you can add to p e t to stop it from crystallizing.
|
|
Try our AS22CJ grade material for this application.By using this material you can produce 720 gm preform for 20 ltr (5 gallon) bottle application.
|
|
is there any way to get pet or petg to go to about a 2mm wall thickness or higher? clarity is key, as well. about a 16 - 20 oz bottle in size.
|
|
dear sir i want know about such low cast addative whic can use in PET for better qualty and better stregnth mentainig.whic can be used in injection moulding for preform making.
|
|
Sirs, It is true that pet cannot withstand filling in temperature at more than 60 deg.c. So,for filling jams, ketchups and some other products which needs filling in temperature@ more than 85 degree c, pet cnnot be applied. But how far hot fillable pet bottles can be used?what is a crystalized neck and how it accepts hot products packed in pet container? what is the process. Will you please explain sir?
|
|
Can you answer best PET grade polymer for packaging of honey. The filling is hot filling @ 50 deg centigade.
|
Hi.
Can you explain differences between production procedure and process of PET and PETg. If you can send me an e-mail. I will be very happy..
THANKS
|
| 1 2 |
