Visitor No. 1859984 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Used Machinery & Mold ==> PET HOT FILLING SYSTEM
[Previous Topic] [Next Topic]
1
Hot fill system

Fine
7
 Poor
1
 3/19/2007 5:31:22 PM By Reza
We are intreted in good condition hot filling systems which should include filling and blow moulding system. Capacity should be at lease 1200 BPH of 1.5 lit.
We are also looking for good design moulds suitable for hot filling application for 1.5 lit and downwards.

Thanks

Santosh Hakim
India

Fine
5
 Poor
2
 7/12/2006 4:53:23 PM By SANTOSH HAKIM
1
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.