Visitor No. 1862812 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Injection Molding ==> Dew Point differences on Dryers
[Previous Topic] [Next Topic]
1
hai..

I am students university.
could you give information hoppar dryer is what kinds of dryer..
is temperature in hopper dryer can be we set..
how to oparate it..
thanks a lot

Fine
3
 Poor
5/31/2008 1:03:17 AM By aldi
check on the air return system got any leaking?it maybe cause by suction from the out side air....

Fine
2
 Poor
1
 6/2/2006 1:43:42 PM By CKtham
I have been asked if the dew point of the air coming from the dryer to the hopper is -40 why is the return air dew point at +15 after the material has be drying in the hopper for more then 24 hours.

Fine
15
 Poor
5
 4/6/2006 4:53:54 AM By Fred
1
 
 

Post A Reply

Name:

Email:

Message:

(Max. 2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.