Visitor No. 1862812 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Machine Trouble Shooting
1
TopicRepliesViewsLast Update
Slitting machine QK15 6 1029 5/18/2010 9:56:02 PM
No NEUTRAL output signal on PLC Card (KPET32) 4 553 1/8/2010 11:25:04 PM
EJECT RET/ADV, NOZZLE ADV/RET don't work properly (KPET12) 4 1034 1/8/2010 10:13:56 PM
Hydraulic Lubrication system 2 314 10/25/2009 11:20:25 AM
Heating Temperature Drop (MDL-200) 3 421 5/9/2009 4:32:04 PM
blowmole settings 1 354 2/16/2009 11:34:15 PM
screw rotates while injection 2 372 11/4/2008 12:47:59 PM
trouble shooting in injection blow molding 1 570 10/31/2008 1:37:21 AM
YUKEN electro-hydraulic flow control valve does not work well (A63 Computer) 2 449 9/16/2008 10:18:14 AM
Manifold Temperature Fluctuation (Preform Mold, 4 Cavity, 5 Gallon) 2 498 4/8/2008 7:55:57 PM
Mold Can't Open (KPET24) 6 565 12/27/2007 7:46:53 PM
MOLD-OPEN or NOZZLE-RET while production (KPET12) 2 525 12/27/2007 12:46:28 PM
screw loses speed + "PTM Board Check Error" (KPET24) 13 967 12/27/2007 11:52:04 AM
FAQ VS600 11 1020 12/14/2007 11:00:44 PM
Material Leakage from Nozzle (HSJ-280) 3 1074 12/11/2007 12:32:41 PM
No Blowing (NB5G) 2 772 12/11/2007 12:00:36 PM
Manual for Elements on NB5G 2 716 12/10/2007 7:24:03 PM
Production Counter of VS600 Machine doesn't Work 2 782 12/10/2007 6:39:36 PM
1
 

Start A New Topic

Name:

Email:
Topic Name:

Message:

(Max.  2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.