Visitor No. 1862812 from US.  
Kenplas Industry Ltd.
　
Kenplas Forum ==> Blow Molding
1 2 3 4
TopicRepliesViewsLast Update
Pet bottle manufacturing plant 19 1825 9/7/2010 12:46:26 AM
PET Bottles 35 6294 9/1/2010 1:30:23 PM
Single-stage Injection Stretch Blow Molding process condition 2 268 7/24/2010 4:17:01 PM
Machine 13 879 7/18/2010 2:45:29 PM
blow molding for PET hot fill 2 535 7/7/2010 2:49:25 PM
Possiblity of using PP instead of PET on 'Nissei ASB' stretch blow molding machine (50MB or 70DPW) 4 1112 7/6/2010 3:53:47 PM
owner manual for battenfeld fisher vk 1-4 1 52 6/17/2010 9:58:06 PM
New Barrier Coat For Juice Bottles 3 1028 6/4/2010 3:08:01 PM
Neck Finish BPF, PCO 21 7125 5/1/2010 2:15:47 PM
HOT Fill bottles (PET) 7 1798 3/3/2010 6:21:30 PM
WHAT R ADVANTAGES OF VERTICAL PLASTIFIER TO HORIZONTAL PLASTIFIER 2 377 1/31/2010 3:51:40 AM
Blow pressure 1 250 1/28/2010 6:20:04 AM
SCREW DESIGN OF LOW MFI PE/PP MATERIAL 1 192 12/28/2009 3:15:14 PM
Hot fill bottles - new design 15 4303 12/22/2009 2:19:20 PM
blow molding,injection molding PET 5 1356 11/30/2009 4:11:34 PM
Blowing Temperature of PET 5 1421 11/21/2009 9:45:37 PM
Multilayered large barrels 1 266 11/19/2009 8:45:42 PM
blow molding process of PETG 26 31543 9/8/2009 3:46:57 PM
shelf life 6 1263 8/27/2009 4:53:59 AM
Neck Finishes - small sizes and selection 2 1809 7/22/2009 9:14:59 PM
1 2 3 4
 

Start A New Topic

Name:

Email:
Topic Name:

Message:

(Max.  2KB)


Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.
[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2010 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.